We have been developing and manufacturing high-end audio products for almost 25 years. CANOR is a tube specialist, the prototype of our first serially produced TP101 integrated tube amplifier was presented at the exhibition in Brno (Czech Republic) in April 1995. The major objective of CANOR is the development and manufacture of high performance audio components combined with high comfort and aesthetics.


Canor Audio Integrato valvolare AI 1.10

CANOR AI 1.10 is an integrated tube amplifier with entirely new topology equipped with KT88 high-power tubes. The aim of the development was to merge the best sound characteristics of previous models together. The amplifier operates in a pure class A with an autobias function, and with a cathode feedback.

Output power 2 x 40 W /4,8 Ohm – ultralinear
  2 x 20 W /4,8 Ohm - triode
Inputs sensitivity 500 mV
Frequency range 10 – 50 000 Hz ±0,5 dB / 5 W
Inputs impedance 30 kOhm
Inputs 5
Harmonic distortion <0,05% / 1 kHz, 5 W
Signal-to-noise ratio > 95 dB
Tube complement 1x 12AX7, 2x 12AT7, 4x KT88
Power 230 V / 50 Hz / 375 VA
Dimensions (w x h x d) 435 x 170 x 485 mm
Weight (net 26 kg
Amplificatore integrato valvolare 40 w. classe A

6.599,00 €

  • disponibile

Canor Audio AI 1.20

CANOR AI 1.20 is an integrated solid-state amplifier in pure class A up to 50 W per channel with a relay attenuator with two standalone blocks for each channel.

Output power 2 x 50 W / 4 Ohm
  2 x 30 W / 8 Ohm
Inputs sensitivity 290 mV
Frequency range 20 – 20 000 Hz ± 0,5 dB / 5 W
Inputs impedance 30 kOhm
Inputs 5
Total Harmonic Distortion < 0,0009% / 1 kHz, 5 W
Signal-to-noise ratio 90 dB
Power 230 V / 50 Hz
Dimensions (w x h x d) 435 x 170 x 485 mm
Weight (net) 28 kg
Amplificatore integrato a stadio solido 50 w in classe A

6.599,00 €

  • disponibile

Canor Audio AI 2.10

CANOR AI 2.10 is a hybrid integrated amplifier with an output power of 2x150 W / 4 Ohm.

Output power 2 x 150 W / 4 Ohm
Inputs sensitivity 400 mV / 150 W / 1 kHz
Frequency range 20 – 20 000 Hz ± 0,3 dB / 5 W
Inputs impedance 30 kOhm
Inputs 4 x RCA, 2 x XLR
Total Harmonic Distortion < 0,05% / 1 kHz, 5 W
Signal-to-noise ratio 95 dB
Tube Complement 2x 6922 EH
Power 230 V / 50 Hz / 460 VA
Dimensions (w x h x d) 435 x 120 x 405 mm
Weight (net) 15 kg

3.599,00 €

  • disponibile

Canor Audio tube cd 1.10

New CD player is equipped with a standalone 24-bit/192kHz digital-to-analog converter for each channel, and with a high-quality CD drive with compact discs disengagement bearing driving mechanism. Super symmetrical passive filters optimized for highest steepness, PCM 1 kHz – 192kH playback and DSD64, 128, 256. Do you want to play audio from your digital library and at the same time listen to your CD collection in top-grade quality?

Frequency Range 20 – 20 000 Hz ± 0,8 dB
Analog Output Impedance < 200 Ohm
Total Harmonic Distortion < 0,005% / 1 kHz
Signal-To-Noise Ratio > 102 dB (20 Hz – 20 kHz)
Outputs RCA / XLR
Analog Output Voltage RCA / XLR 2,5V RMS / 5V RMS
Digital Inputs USB, Optical and Coax
Digital Outputs Optical and Coaxial
Tube Complement 2x 12AX7 / 2×6922 / 1x 6CA4
Power 230 V / 50 Hz / 100 VA
Dimensions (w x h x d) 435 x 170 x 420 mm
Weight (net) 15 kg

4.999,00 €

  • disponibile

Canor Audio cd 2.10

CANOR CD 2.10 is a tube DA converter/CD player utilizing AK4490 32-bit DA converter.

Frequency Range 20 – 20 000 Hz ± 0,3 dB
Analog Output Impedance < 200 Ohm
Total Harmonic Distortion < 0,005% / 1 kHz
Signal-To-Noise Ratio > 102 dB (20 Hz – 20 kHz)
Inputs RCA / XLR
Analog Output Voltage RCA / XLR 2V RMS / 4V RMS
Digital Inputs USB, Optical and Coax
Digital Outputs Optical and Coaxial
Tube Complement 4x 6922
Power 230 V / 50 Hz / 60 VA
Dimensions (w x h x d) 435 x 120 x 405 mm
Weight (net) 12 kg

3.590,00 €

  • disponibile

Canor Audio Pre phono PH 1.10

CANOR PH 1.10 is an all-tube turntable preamplifier for both MM and MC phono cartridges. Nine tubes, one vacuum tube out of them used to rectify anode voltage. Absolute selection and tubes matching with above-average parameters. A high-quality step-up Lundahl transformer for MC phono cartridges. If a turntable is fitted with two tonearms, one having MM phono cartridge installed and the other MC, both can be connected simultaneously without mutually affecting each other. Hight variability of gain settings, resistances and capacitances settings for all types of phono cartridges.

MM 50, 150, 270, 370, 520, 620, 740 and 840 pF / Gain: 46 dB
MC1 10, 20, 40, 80, 150, 300, 600 and 1200 Ohm / Gain: 70 dB
MC2 2, 5, 10, 20, 40, 80, 150 and 300 Ohm / Gain: 76 dB
Output impedance 100 Ohm
Inputs RCA – MM / RCA – MC
Outputs RCA / XLR
Total Harmonic Distortion MM/MC
Subsonic Filter 18 dB / Octave
RIAA accuracy 0,3 dB / 20 Hz – 20 kHz
Signal-To-Noise ratio MM 72 dBV (87 dBV – IEC -A)
Signal-To-Noise ratio MC 68 dBV (82 dBV – IEC -A)
Tube Complement 8x 6922EH, 1x 6CA4EH
Power 230 V / 50 Hz / 70 VA
Dimensions (w x h x d) 435 x 170 x 485 mm
Weight (net) 17 kg

5.590,00 €

  • disponibile